How To Clean The Baby Brezza Formula Pro

Once a month give your Formula Pro Advanced a thorough cleaning.

Hand wash all parts shown above with warm soapy water, rinse well and air dry thoroughly.

Monthly Descaling Instructions

You can leave the formula powder in the Powder Container during the descaling process.

To prevent mineral scale on the water heater inside your Formula Pro Advanced, follow these easy steps:

1. Remove the Water Tank, empty it and fill it with 600ml distilled (clear) vinegar and 600ml of sterile or pre-boiled cooled water.

2. Place the Water Tank on the Base of the machine and place a cup larger than 300ml under the funnel.

3. Select "300ml" with the "ml" button, then press the "water only" to dispense.

4. Empty the cup, place it back under the Funnel, then press the "water only" button again to dispense another 300ml.

5. Now unplug the machine, remove the Water Tank, and empty it. Let the machine sit for 4 hours.

6. Wash, rinse and fill the Water Tank to the max line with sterile or pre-boiled cooled water, then place it back on the base.

7. Plug in the machine, place a cup to catch 300ml water and use the "water only" button to run a 300ml cycle. Dispose of the water dispensed in the cup and then repeat this step to run the entire tank of water through the machine. When the "Low Water" indicator turns on, you're done rinsing.

8. Refill the Water Tank with sterile or pre-boiled cooled water and return to normal use.